DIY Gold Bookshelf

I've been on the hunt for a gold bookshelf and haven't been able to find one under my budget of $100. Maybe because the color is associated with luxury, all gold furniture I've run into seems to be very pricey.... and you know what that means, a DIY project.

Instead of starting from scratch, I decided to do another Ikea hack. I wanted something very simple, and let's face it, cheap. I found the Ikea Vittsjo for $40. Here's what it looks like before I got to it.

All I did was spraypaint the bookshelf frame, but spray painting is not as easy as it sounds. here are the Materials I used: White Primer Spray Paint, Gold Spray Paint, and 180-250 Grit Sand Paper. Optional: mask

DIRECTIONS

1. Find an open area like a backyard or garage. If you choose to do it in a garage like I did, make sure to keep the garage door open as spray paint fumes are not good for you!
2. Keep in mind that there will be "overspray" which is spray paint residue that will get everywhere and looks like a light powder, so make sure there is nothing nearby that can get accidentally sprayed in the process. Make sure to put tarp, cardboard or some sort of material to protect your floor.
3. Assemble the book shelf but do not put the glass shelves on. You can put the 2 top and bottom wood boards, or you can spray paint them separately.
4. Wipe down the book shelf and make sure it's completely clean and free of dust or other dirt.
5. Prime the bookshelf with white primer. When you spray paint, the key is to do a very light coat about 6-8" away in an up and down or right to left motion. 
6. Let the first layer of primer dry (about 10 minutes) and then do another layer or 2 until the bookshelf is white. Again, make sure you don't spray too close or too heavy or else the paint will drip and you will see that texture.
7. After the primer is dry, lightly sand the entire shelf t make sure the surface is smooth. Wipe down any sanded residue.
8. Take your gold spray paint and spray one light layer. Again, make sure to stay about 6-8" away and keep it very light or else your paint will drip.
9. Let the first layer dry and do another layer or 2 until you get the color you like. I did 3 layers. 

DRIP TIP

This was my first time spray painting a piece of furniture and I did mess up in a couple of places where I spray painted too close or too heavy where the paint dripped. In order to fix this, i took a stronger sandpaper (60-80 grit) and sanded off the paint where it dripped and had an uneven texture. Once it was smooth, I re-primed with white and then spray painted with gold. It blended in pretty well, so don't worry too much if you mess up and have to do this. 

Here's the final outcome styled with some of my favorite books, sculptures, and albums!

Ikea Hack Part 2 - Matching Dresser

In my earlier post, I showed you how to do an Ikea Hack on the Rast 3 Drawer Chest with a little painting and staining. There is no matching Rast Dresser, but the Ikea Tarva 6 Drawer Chest is pretty darn similar. It is a little pricey at $150, but all other 6 drawer chests I liked started at $250 or more. Here's what it looks like after assembling it.

I'm sure you can get even more savvy on this part and find cheaper unfinished furniture or a thrifted dresser to re-finish, but all-in-all I'm still saving at least $100 for a brand new dresser that looks so much more expensive. I plan to utilize it as a TV stand in my Master Bedroom as well. Here's how it turned out after following the same steps as finishing the night stands in my previous post:

And here's the Tarva Dresser with the 2 night stands I made to match, oh and my Assistant Rambo too.

Keep checking back on my blog for my next DIY project with bookshelves.

DIY Ikea Hack

In my last post, I found a steal of a bed, but even with saving over $600, spending almost $700 on a bed is still a lot of money. I wanted to finally graduate from Ikea onto better quality furniture, but hey some times you just have to make it work. I'm investing more money (while still finding a deal of course) on the main pieces, and going to Ikea or consignment stores on the smaller pieces. I've been seeing a lot of Ikea Hacks on Pinterest so I decided to try my hand at it. I got 2 of the Ikea Rast 3 Drawer Chest which were only $35 each and in an unfinished wood. Here's what it would look like standard.

For this ikea hack, I bought all my supplies at Lowe's except for the new knobs:

• Valspar Ultra White Semi-Gloss Paint (1 quart)
• Minwax Wood Finish Stain in Provincial (1 quart)
• Minwax Semi-Gloss Polyurethane (1 quart) 
• Knobs from LeeValley.com
• Foam brushes (roller and hand brush)
• Sanding Block or Sand Paper 200-220 Grit (not pictured)
• Old towel or t-shirt to wipe off stain (not pictured)

The Lowe's employees in the paint section are always very helpful, so use the free help if you're not super knowledgeable like me. They tested different stains and paints for me so I could make sure I liked what they looked like when dry. They also recommended supplies and gave me tips. One tip I have to share is to make sure to use the same material brush if you're using more than one, as the different brush strokes will show. I used a roller brush to cover more surface and then a small hand brush for the corners and for staining, so i made sure both brushes were foam. Now for the dirty work...

The first step was to put the ikea night stand together. It's much easier to paint and stain when it's put together. 

1. Wipe down the drawers and make sure there's no dust. I used the roller brush to paint the cover of the drawers white. I painted each drawer 3 layers to get that white color I wanted. Make sure to follow the instructions on drying time between each paint layer. 
2. For the frame, lightly sand the surface and wipe off all the residue with a towel, or in my case an old t-shirt. 
3. I used the foam hand brush to lightly paint the stain on. Follow the steps on the stain. This stain said to wait 10-15 minutes then wipe the excess stain off after with a towel. I was happy with the color after one layer, but you can opt to do another layer of stain if you want it darker.
4. After the stain was dry, it was time to seal the stain with polyurethane. It's important to use very light layers and make sure there is no excess drip because it will dry like that and look like gobs of glue. For this brand, it recommended 3 layers of polyurethane with a 2 hour dry time between each layer. Follow the directions; after the first layer dried, I did a light sand, wiped off the excess, and brushed on another layer of polyurethane. I repeated this and on the 3rd final coat, you don't have to sand it down, just let it try for at least 24 hours.
5. The final step was to screw in my own knobs since I didn't like the ones it came with. They have a variety at Lowe's and Home Depot.

And here is the final product. I absolutely love how rich the stain came out and how the white paint and gold knobs give it a modern feel.

Would you have ever guessed that this started as a $35 Ikea Drawer Chest? With just a few more bucks and some sweat equity, I think these new night stands will look fab with our new bed, and dare I say, look expensive too. We also made a matching dresser which will double as a TV stand, so watch out for that on the next post...